Difference between revisions of "Tools For Beginners"

From RobotCombatWiki
Jump to navigation Jump to search
Line 1: Line 1:
 
Builders with years of experience often find themselves in need of a new tool or device to build or run their robot but there are a few things that all builders, even people using [https://robotcombatwiki.com/wiki/Kits robot kits], will need.<br>
 
Builders with years of experience often find themselves in need of a new tool or device to build or run their robot but there are a few things that all builders, even people using [https://robotcombatwiki.com/wiki/Kits robot kits], will need.<br>
 
<br>
 
<br>
<strong>Soldiering Station</strong><br>
+
<strong>Soldering Station</strong><br>
Mastering soldering can be difficult but if you don't have the right tools, even with many hours of practice you'll never become proficient. There are a lot of inexpensive and worthless soldering stations out there. You don't need to break the bank but you should get a quality tool from a manufacturer like Weller or Hakko or X-Tronic. There are a lot of [https://makeradvisor.com/best-soldering-irons-beginners-hobbyists/ online guides] comparing soldiering stations.<br>
+
Mastering soldering can be difficult but if you don't have the right tools, even with many hours of practice you'll never become proficient. There are a lot of [https://www.makerspaces.com/how-to-solder/ beginners guides] to help you with the basics. There are a lot of inexpensive and worthless soldering stations out there. You don't need to break the bank but you should get a quality tool from a manufacturer like Weller or Hakko or X-Tronic. There are a lot of [https://makeradvisor.com/best-soldering-irons-beginners-hobbyists/ online guides] comparing soldering stations.<br>
 
+
The heat from soldering can sometimes damage components. One of the best ways to avoid this is to use leaded 60/40 (60% tin, 40% lead) rosin core solder. Some places will advocate for using lead-free solder but it's melting point is much higher and is much more difficult to use. Another thing to consider getting is a pair of [https://makeradvisor.com/best-helping-hands-for-soldering Helping Hands]. Typically you will need to hold onto three or four pieces (wire, motor, solder, iron) to solder and this can be difficult with two hands. Helping Hands will hold the pieces you are soldering together for you so you can concentrate on just getting a good solder joint.
 
<br>
 
<br>
 
<strong>Wire Cutters</strong><br>
 
<strong>Wire Cutters</strong><br>

Revision as of 16:19, 23 April 2021

Builders with years of experience often find themselves in need of a new tool or device to build or run their robot but there are a few things that all builders, even people using robot kits, will need.

Soldering Station
Mastering soldering can be difficult but if you don't have the right tools, even with many hours of practice you'll never become proficient. There are a lot of beginners guides to help you with the basics. There are a lot of inexpensive and worthless soldering stations out there. You don't need to break the bank but you should get a quality tool from a manufacturer like Weller or Hakko or X-Tronic. There are a lot of online guides comparing soldering stations.
The heat from soldering can sometimes damage components. One of the best ways to avoid this is to use leaded 60/40 (60% tin, 40% lead) rosin core solder. Some places will advocate for using lead-free solder but it's melting point is much higher and is much more difficult to use. Another thing to consider getting is a pair of Helping Hands. Typically you will need to hold onto three or four pieces (wire, motor, solder, iron) to solder and this can be difficult with two hands. Helping Hands will hold the pieces you are soldering together for you so you can concentrate on just getting a good solder joint.
Wire Cutters

Drivers

Saws